Skip to content
Pathfinder Enterprises
Mountain biker riding through a puddle on a forest track

Best mountain bike helmets: 5 picks for UK trails

Five mountain bike helmets worth buying, from budget trail lids to convertible full-faces, plus how to get the fit and certification right.

Best mountain bike helmets: the quick answer

There is no single best mountain bike helmet — there is the one that fits your head and suits the riding you actually do. A cross-country race lid and a bike park full-face are built for completely different crashes, and a helmet that fits badly is worse than a cheaper one that fits well.

Here is the short version:

  • Best overall: Fox Speedframe Pro — the most complete trail helmet for most riders.
  • Best for hot days and big climbs: Giro Manifest Spherical — the best venting here.
  • Best for steep, technical riding: Troy Lee Designs A3 — the deepest coverage of the half-shells.
  • Best one-helmet solution: Bell Super Air R Spherical — a clip-on chin bar for the steeper days.
  • Best value: Endura MT500 MIPS — a no-nonsense trail lid for British conditions.

The five best mountain bike helmets

Fox Speedframe Pro

Best overall

Rating4.7/5

The Speedframe Pro is the helmet most UK riders should start with. It covers the essentials properly: a MIPS liner, deep coverage at the back of the head, a three-position visor you can push up far enough to stash goggles, and a magnetic Fidlock buckle you can do up with cold, wet hands. Ventilation is strong enough for summer climbing, and the XT2-treated liner resists the smell that builds up in a helmet you sweat in five times a week. It is not the lightest lid here and not the plushest, but the balance is right for trail riding in British weather.

Why it wins

  • MIPS liner with genuinely deep rear coverage
  • Magnetic buckle is easy to fasten with cold, wet hands
  • Three-position visor clears goggles and lifts out of the way on climbs
  • Anti-microbial liner copes with regular washing

Watch out for

  • Retention cradle is functional rather than plush
  • Heavier than a cross-country lid if you race
  • Sizing differs from other brands — try before you buy

Giro Manifest Spherical

Best for hot weather and long climbs

Rating4.6/5

Giro's Spherical construction uses two layers of foam that rotate against each other, doing the job of a slip-plane liner without a plastic sheet against your scalp. The result breathes exceptionally well: deep internal channels pull air over the top of your head and out of the rear vents, which is what you want on a long fireroad climb in July. The extras are sensible rather than gimmicky — eyewear docks that hold glasses when you take them off, a rubber gripper for a goggle strap, and a Roc Loc cradle with plenty of vertical adjustment.

Strengths

  • Outstanding ventilation even when you are working hard
  • MIPS Spherical avoids a plastic slip layer against the head
  • Eyewear docks and rear goggle gripper are genuinely useful
  • Roc Loc cradle adjusts up and down as well as around

Weaknesses

  • You pay for the construction and venting rather than extra coverage
  • Very open shell means more wind noise and little warmth in winter
  • Not the deepest coverage if you ride steep, technical terrain

Troy Lee Designs A3

Best for aggressive trail and enduro

Rating4.5/5

The A3 is built for riders who want half-shell comfort with the coverage of something beefier. It sits low at the back and wraps further around the temples than a cross-country lid, while the MIPS liner handles rotational impact. Venting is generous and the internal channelling keeps air moving despite the deeper shell. The three-position visor gives plenty of goggle clearance, and there is a gripper at the rear to hold a strap. It is heavier and warmer than a pure trail helmet, so it makes most sense if your riding is steep, rooty and mostly in the trees.

Strengths

  • Deep rear and temple coverage
  • MIPS liner with substantial padding that stays put
  • Plenty of goggle clearance from the adjustable visor
  • Feels planted on rough descents

Weaknesses

  • Warmer and heavier than a lightweight trail helmet
  • More helmet than you need for towpaths and easy trail-centre loops
  • Padding feels snug from new — check sizing carefully

Bell Super Air R Spherical

Best if you want one helmet for everything

Rating4.4/5

A convertible lid: ride it as a normal half-shell for trail-centre laps, then clip the chin bar on for steeper, faster days. The Spherical MIPS construction carries over and, in half-shell mode, it is genuinely comfortable and well vented. The chin bar goes on and off without tools, which means you will actually bother. Be honest about what it is, though — a removable chin bar adds face protection in a trail crash, but it is not a substitute for a dedicated downhill full-face. Check the certification label before you take one into a bike park.

Strengths

  • Two helmets in one, with no tools needed to swap
  • MIPS Spherical in both configurations
  • Sensible venting and a good visor in half-shell mode
  • Ideal for riders who do a bit of everything

Weaknesses

  • Heavier than a plain half-shell, especially with the bar fitted
  • Not a replacement for a dedicated downhill-certified full-face
  • Chin bar, clips and bolts need cleaning and checking

Endura MT500 MIPS

Best value trail pick

Rating4.3/5

Endura is a Scottish brand and the MT500 is designed for the sort of wet, rooty riding most of us actually do. You get MIPS, a decent amount of rear coverage, a well-vented shell and a visor that adjusts without tools. It is comfortable, straightforward and easy to live with, and replacement pads are easy to find. It is not as refined as the Giro or as deep as the Troy Lee, and the finish is functional rather than fancy, but as a first proper trail helmet or a second lid for winter it is hard to argue with.

Strengths

  • MIPS at the budget end of the trail helmet market
  • Designed and tested for wet, rooty riding
  • Tool-free adjustable visor and comfortable liner
  • Spare pads and parts are easy to source

Weaknesses

  • Less coverage than enduro-focused lids
  • Finish and detailing are basic
  • Venting is good rather than exceptional

How the five compare side by side

Trail helmets compared on the things that change how they ride
FeatureFox Speedframe ProGiro Manifest SphericalTroy Lee A3Bell Super Air R
Rotational protectionMIPS linerMIPS SphericalMIPS linerMIPS Spherical
Head coverageTrail coverage, deep at the backOpen trail shellDeepest here — low at the back and templesHalf-shell, plus a chin bar when fitted
VentilationStrongThe best of the fiveVery goodGood as a half-shell, warm with the bar on
Goggles and glassesVisor clears goggles; rear strap channelEyewear docks and rear goggle gripperThree-position visor with generous goggle roomAdjustable visor and strap guides
Best forAll-round trail ridingLong climbs and hot daysSteep, technical enduro-style trailsRiders who want one helmet for everything

The Endura MT500 MIPS is not in the table because it competes on a different question: how much helmet you can get without paying for the badge. It gives you MIPS and a usable trail shape, and gives up a little refinement and coverage compared with the four above it.

Read the table by asking which row you would actually pay more for. If you ride in a warm, exposed trail centre and climb a lot, ventilation matters more than depth. If your local woods are steep, wet and rooty, coverage wins every time.

Half-shell, convertible or full-face?

Half-shell helmets are what most people picture: open face, light, cool, and fine for trail centres, bridleways and general mountain biking. All five picks except the Bell are half-shells, though the Troy Lee stretches the definition with its deep coverage.

Convertible helmets like the Bell Super Air R let you fit a chin bar for steeper days. They are a good compromise for one-bike riders and for anyone towing a child on a follow-me or riding uplift days occasionally, but they are heavier and hotter than a plain half-shell and less protective than a true downhill lid.

Full-face helmets are built for bike parks, uplift riding and anything at speed over jumps. They are heavier, hotter and more expensive, and you cannot hear or drink as easily. If you only visit a bike park once or twice a year, renting a full-face at the centre is often the sensible move.

What really matters when you choose

Ignore the marketing hierarchy and judge a helmet on these, in this order:

  • Fit and retention. The helmet should sit level, just above your eyebrows, with the cradle gripping the back of your head rather than your forehead. With the straps done up and the dial snug, the skin at your temples should move when you rock the helmet.
  • Rotational protection. MIPS and MIPS Spherical add a low-friction layer that lets the shell slide a few millimetres relative to your head in an angled impact. Most lids above the cheapest tier now have something equivalent.
  • Coverage. Depth at the back and around the temples is what protects you in the slow, awkward crashes that cause most injuries. Enduro-shaped helmets cover more; cross-country lids cover less.
  • Ventilation versus warmth. More vents mean a cooler climb and a colder descent in February. If you ride all winter, a lid with closable or fewer vents and room for a thin skull cap is more use than the airiest shell.
  • Goggles and glasses. Check the visor lifts far enough to park goggles and that there is a gripper at the back for the strap.
  • Weight. The difference between a light and a heavy trail helmet is noticeable by the end of a long day, but not as noticeable as a bad fit.
Fit and retention
4.5/5

All five use dial cradles; the Giro offers the most vertical adjustment, the Endura the simplest.

Rotational protection
5.0/5

Every pick here uses MIPS or MIPS Spherical rather than a token alternative.

Ventilation
4.0/5

The Giro leads clearly; the Troy Lee and Bell trade some airflow for coverage and weight.

Coverage
4.5/5

The Troy Lee is the deepest half-shell here; the Giro the shallowest.

Weight
4.0/5

Half-shells are noticeably lighter than the convertible, especially with the chin bar on.

Goggle compatibility
4.5/5

All five take a goggle strap; check visor lift if you wear big goggles.

Getting the fit right (the bit that actually protects you)

Measure your head with a tape just above the ears and across the forehead, then check that number against the brand's own size chart — sizing is not consistent between makes, and a medium in one brand can be a large in another. If you are between sizes, go with the one that matches your measurement rather than sizing up for comfort.

Once it is on, do three checks. First, the front edge should sit roughly two fingers' width above your eyebrows, not tipped back like a sun hat. Second, the straps should meet in a V just under each ear. Third, with the buckle done up and the dial snug, grab the helmet and rock it side to side and front to back — your skin should move with it and it should not bottom out on your skull anywhere.

If you have long hair, try the helmet with your hair tied the way you ride. Cradles that sit low at the back can catch a ponytail, and a helmet you fidget with is a helmet you will not wear.

Certification and the specs that matter

Every helmet sold in the UK for cycling has to meet a minimum standard, so the safety floor is the same across a budget lid and a premium one. What you pay extra for is how well it manages angled impacts, how much of your head it covers, how hard it is to live with in the heat, and whether the fit system works for your head shape.

Check the label inside the shell before you buy anything secondhand or imported — a helmet without a UK or European mark is not a bargain, whatever the price.

UK/European cycle helmet standard
EN 1078 — the baseline for helmets sold for cyclists, skateboarders and roller skaters
Downhill rating to look for
ASTM F1952 — common on dedicated full-face helmets; check the label if you ride bike park
Rotational systems here
MIPS and MIPS Spherical, both of which add a low-friction layer between head and shell
Retention
Dial cradles with vertical adjustment; some also adjust the occipital grip
Closure
Standard quick-release buckle, or a magnetic buckle such as Fidlock
Padding
Washable, anti-microbial liners; check spare pads are available before you buy

Care, sweat and when to replace

Wash the liner every few weeks with a mild soap and lukewarm water, and let it air dry away from radiators — heat warps foam and shrinks pads. Do not soak a MIPS liner or force the slip layer apart; if it has separated from the shell, the helmet is done.

Replace any helmet that has taken a real impact, even if the shell looks perfect. The foam is designed to crush once, and a cracked or compressed liner will not do it again. Beyond crashes, most manufacturers suggest replacing a regularly used helmet after three to five years, because sweat, sun and the adhesive holding the liner together all degrade with time. Store it out of a hot car boot and it will last closer to the top of that range.

Our verdict

Frequently asked questions

Can I use a mountain bike helmet for commuting?

You can — it meets the same EN 1078 standard as a road or commuter helmet. But trail lids are heavier, the peak can block some upward vision in traffic and few have reflective details or light mounts. If most of your riding is urban, a lighter commuter-specific helmet makes more sense.

How long should a mountain bike helmet last?

Replace it after any crash where your head takes a hit, even if it looks undamaged — the foam is designed to crush once. Otherwise many manufacturers suggest three to five years of regular use, as sweat, sunlight and repeated knocks degrade the liner and adhesives.

Do I need to spend more for a safer helmet?

Not strictly. Every helmet sold in the UK has to meet the same minimum standard. Spending more usually buys a rotational liner, better ventilation, lower weight and a more adjustable fit — all worth having, but a well-fitted cheaper helmet beats a badly fitted expensive one.

Can I wear goggles with a trail helmet?

Most trail and enduro helmets have a rubber gripper at the back for a goggle strap and a visor that lifts far enough to park goggles on the shell. Check both before buying, and take your goggles to the shop if you can.

Is a convertible helmet as safe as a full-face?

No. A removable chin bar adds useful face protection for trail riding, but dedicated downhill full-faces are built and certified for harder, faster crashes. If you ride bike park or uplift days regularly, buy a proper full-face.

Related articles

Best balance bikes:

five picks for UK toddlers

Five balance bikes worth buying for UK toddlers, from the lightweight Hornit AIRO to budget and British-built options, plus how to size one.

Best Picks4.5/5

Best beginner bikes:

5 first bikes for UK riders

Five beginner bikes we'd recommend for UK riders, from budget hybrids to off-road starters, plus how to choose the right size and type.

Best Picks4.5/5

Best bike computers:

5 picks for every kind of rider

Which bike computer is worth buying in the UK? We compare Garmin, Wahoo, Hammerhead and Lezyne units for mapping, battery life and ease of use.

Best Picks4.5/5

Menu

Search