Skip to content
Pathfinder Enterprises
Hand holding a phone above bicycle handlebars

Best bike mounts: 5 phone mounts worth buying

From Quad Lock to budget strap mounts, here are the bike phone mounts worth buying and the fitting and vibration questions to settle first.

The quick answer

A bike mount is one of those small purchases that decides whether your phone survives the commute. The right one holds the handset rigid over broken tarmac, keeps the screen readable at a glance and lets you pocket the phone the moment you lock up.

For most riders the Quad Lock Out Front Mount Pro is the safest buy: the twist-and-lock connection is well proven, the phone sits ahead of the stem where you can actually see it, and the case and accessory range is the widest of anything here. If you want something slimmer with a one-press release, the Peak Design Out Front Bike Mount is the pick. Riders who spend their weekends on gravel or badly surfaced lanes should look at the SP Connect Bike Mount, and anyone who takes the phone off at every stop will get on well with the Fidlock VACUUM. On a tight budget, the Nite Ize Wraptor straps any phone to any bar for very little.

The five picks compared

There are two families here. Case-based systems — Quad Lock, Peak Design, SP Connect and Fidlock — hold the phone through a dedicated case or a stick-on adaptor, which is why they feel so solid and why they cost more once you've bought the case. Strap mounts like the Nite Ize Wraptor grip whatever phone you already own, at the expense of rigidity.

How the five picks differ
MountBest forPhone attachmentCase required?
Quad Lock Out Front Mount ProAll-round use on road and commuter bikesTwist-and-lock onto a Quad Lock case or universal adaptorYes — Quad Lock case or adaptor
Peak Design Out Front Bike MountFast one-press removalSlimLink magnetic latch with a mechanical lockYes — Peak Design case or adaptor
SP Connect Bike MountRough roads, gravel and trailsTwist-and-lock with a locking screwYes — SP Connect case or adaptor
Fidlock VACUUM Handlebar MountRiders who take the phone with them constantlyMagnetic location plus vacuum suctionYes — compatible case or adaptor
Nite Ize WraptorTight budgets and second bikesSilicone straps over the phone cornersNo

Best overall: Quad Lock Out Front Mount Pro

Quad Lock Out Front Mount Pro

Best overall

Rating4.7/5

The set-up most riders end up with, and for good reason. The mount clamps to the handlebar and holds the phone out ahead of the stem, so the screen sits in your line of sight without stealing bar space from a bell or light. The twist-and-lock connection is quick to learn and feels unmistakably engaged once the phone has turned through its quarter-turn.

The catch is the case: you need a Quad Lock case for your phone, or the universal adaptor stuck to a case you already own. In exchange you get the deepest ecosystem of the five, including a vibration damper and a wireless charging head, both sold separately. If you commute, ride sportives or simply want to stop thinking about this purchase, buy this one.

Why we rate it

  • Twist-and-lock hold feels secure on poor surfaces
  • Out-front position keeps the screen visible and the stem clear
  • Case, adaptor and accessory range is the widest here
  • Vibration damper available for high-mileage riders

What to weigh up

  • Locked into Quad Lock's case ecosystem
  • The case is bulkier than a bare phone
  • Costlier than a strap mount once the case is added

Best for quick release: Peak Design Out Front Bike Mount

Peak Design Out Front Bike Mount

Best for quick release

Rating4.5/5

Peak Design's SlimLink connection uses magnets to pull the phone into the right place and a mechanical latch to keep it there, which means you can seat it one-handed without looking and release it by pressing a button. It's the neatest of the case-based mounts and the most pleasant to live with if you stop often — at a cafe, a shop, a train platform.

As with Quad Lock, you need a Peak Design phone case or their universal adaptor for a phone they don't make a case for. The system extends to car and tripod mounts, so the case earns its keep off the bike too.

Why we rate it

  • One-press release, easy to use with gloves on
  • Slim, well-finished body that doesn't clutter the cockpit
  • Magnets guide the phone into place without fiddling
  • Same case works with Peak Design's other mounts

What to weigh up

  • Also locked into a case ecosystem
  • Universal adaptor adds bulk to a bare phone
  • Fewer bike-specific accessories than Quad Lock

Best for rough roads: SP Connect Bike Mount

SP Connect Bike Mount

Best for gravel and trail riding

Rating4.3/5

SP Connect's twist-and-lock system is popular with gravel riders and motorcyclists, and the bike mount adds a small locking screw that stops the phone rotating back out of the mount — worth knowing about if you ride badly surfaced lanes or towpaths where the bars chatter constantly.

Like the two above it needs an SP Connect case or a universal adaptor. SP Connect also sells an anti-vibration module for riders covering big distances, which is the sort of add-on you appreciate more the longer you spend in the saddle.

Why we rate it

  • Locking screw gives extra security over the twist-lock alone
  • Anti-vibration module available
  • Case range covers most current phone models
  • Solid on chattery gravel and towpath surfaces

What to weigh up

  • Twist motion takes a little practice in gloves
  • Ecosystem lock-in applies here too
  • Bulkier set-up than a slim magnetic mount

Best for constant removal: Fidlock VACUUM Handlebar Mount

Fidlock VACUUM Handlebar Mount

Best for grabbing the phone on the go

Rating4.2/5

Fidlock does something different: magnets funnel the phone into position, then a vacuum seal holds it flat against the mount. There's no twisting, no lining up, and the release is a single lever, so it's the quickest of the five to take on and off — handy for city riders who dismount every few hundred metres.

It relies on a compatible case or adaptor, and the suction needs a clean, flat surface to seal against, so grit and scratches on the back of the case are worth watching. It's a beautifully tidy mount for road and commuter use rather than a rock-hopping choice.

Why we rate it

  • No twisting — the phone self-locates by magnet
  • Single-lever release makes it the fastest to remove
  • Very clean, low-profile look on the bars
  • Good choice for frequent stops in town

What to weigh up

  • Vacuum hold depends on a clean, flat case back
  • Needs a Fidlock-compatible case or adaptor
  • Less suited to hard off-road use than a positive twist-lock

Best budget buy: Nite Ize Wraptor

Nite Ize Wraptor

Best budget strap mount

Rating3.8/5

A simple silicone cradle that wraps around the handlebar and hooks over the corners of your phone. No case, no adaptor, no brand tie-in — it grips whatever handset is in your pocket, and it costs a fraction of the case-based systems.

What you give up is rigidity. Straps stretch over time, the phone can shift slightly on rough ground, and there's no vibration damping at all. For a second bike, a spare phone, a rental bike on holiday or a rider who only needs to glance at a route now and then, though, it's hard to beat.

Why we rate it

  • Works with any phone, no case purchase needed
  • Cheap enough to keep one on each bike
  • Moves between bikes in seconds
  • Copes with unusual bar diameters

What to weigh up

  • Straps stretch and eventually need replacing
  • Noticeably less rigid than a locked mount
  • Strap over the corners can cover buttons and edges

How to choose a bike mount

Work through these before you buy:

  • Which case ecosystem suits your phone. Check that a case exists for your exact model before committing to Quad Lock, Peak Design, SP Connect or Fidlock. Older or unusual phones often rely on a stick-on adaptor instead.
  • Where the phone will sit. Out-front mounts keep the screen up and visible; stem mounts are neater but low; bar mounts are cheapest to add but compete with lights, bells and cables.
  • Bar space and bar type. Carbon bars, aero bars and crowded cockpits all limit your options. Measure the free diameter either side of the stem first.
  • How often you remove the phone. If it comes off at every stop, a one-press or magnetic release beats a twist-lock.
  • How rough your riding is. Lanes, towpaths and gravel reward a positive lock and, ideally, a vibration damper.
  • Whether you need charging. Several systems sell powered heads or charging modules, which is worth planning for if you navigate long days out.
Security of the hold
5.0/5

The whole point of the purchase — a mount that lets go once has failed.

Whether a special case is needed
4.5/5

Decides the true cost and whether your current phone is even supported.

Screen visibility and position
4.5/5

Out-front beats stem-mounted for glanceability on busy roads.

Vibration protection
4.0/5

Matters most for high mileage and for phones with stabilised cameras.

Speed of removal
3.5/5

A daily consideration for city riders, less so for weekend riders.

Total cost including case
4.0/5

Compare the case plus mount, not the mount alone.

Other things people mean by "bike mount"

The phrase gets used for several unrelated products, so a quick pointer:

  • Cycle carriers for cars. Roof, towbar and rear-door carriers are a completely different purchase, chosen around your car's towbar or roof bars, the weight of your bike and whether it's an e-bike.
  • Garage storage mounts. Wall hooks and ceiling hoists hold the bike itself; look for one rated for your bike's weight, which matters a lot with an e-bike.
  • Bike computer mounts. Garmin and Wahoo units use a quarter-turn puck that is not interchangeable with any phone mount here. Many riders run a computer out front and keep the phone in a pocket.
  • Accessory mounts. Light brackets, action-camera mounts and GoPro-style adaptors are separate fittings, though some phone mounts accept an action-camera adaptor underneath.

Our verdict

Bike mount FAQs

Will a phone mount fit my handlebars?

Most clamp and strap mounts come with shims or a flexible strap to suit common bar diameters, but aero bars, oversized carbon bars and cockpits already carrying a light, bell and computer can be tight. Measure the bar either side of the stem and leave room for the mount body before ordering.

Do I need a special phone case?

Only for the case-based systems. Quad Lock, Peak Design, SP Connect and Fidlock all need their own case or a stick-on adaptor, so check your exact phone model is covered. Strap mounts like the Wraptor need nothing at all.

Can vibration damage my phone's camera?

Cameras with optical image stabilisation are the concern, which is why vibration dampers exist and why motorcycle riders are warned about it. A bicycle transmits less vibration than an engine, but a damper is sensible insurance if you ride long distances with the phone mounted.

Can I use one mount on two bikes?

Yes. Case-based mounts need a second clamp for the second bike, which is cheaper than a whole new kit; strap mounts simply move across in seconds. Keep a spare clamp on the winter bike if you swap regularly.

Can I mount a bike computer on the same fitting?

No. Garmin and Wahoo computers use a quarter-turn puck that isn't compatible with phone mounts. Some riders fit a separate out-front computer mount and keep the phone on a bar mount or in a pocket.

Related articles

Best balance bikes:

five picks for UK toddlers

Five balance bikes worth buying for UK toddlers, from the lightweight Hornit AIRO to budget and British-built options, plus how to size one.

Best Picks4.5/5

Best beginner bikes:

5 first bikes for UK riders

Five beginner bikes we'd recommend for UK riders, from budget hybrids to off-road starters, plus how to choose the right size and type.

Best Picks4.5/5

Best bike computers:

5 picks for every kind of rider

Which bike computer is worth buying in the UK? We compare Garmin, Wahoo, Hammerhead and Lezyne units for mapping, battery life and ease of use.

Best Picks4.5/5

Menu

Search